CYBEX VR1 Overhead Press, Руководство пользователя

Страница: 19 / 24

Qty. Description
1 Jam nut 1
1 Tension adjustment nut 2
Rod End Adjustment
This type of adjustment uses a socket head cap screw (SHCS) securing a cable rod end bearing to the machine.
Primary adjustment is by turning the rod end bearing. The other end of the cable usually contains a roll pin cable
adjustment.
Qty. Description
1 Cable end 1
1 SHCS 2
1 Jam nut 3
1 Cable rod end bearing 4
1 Nylon locknut 5
Roll Pin Adjustment
This type of adjustment uses a roll pin and series of holes in the weight stack top weight connector.
Qty. Description
1 Roll pin 1
1 Top weight connector 2
Cam End Adjustment
This type of adjustment uses an adjustment bolt on the pulley bracket. Loosen nut and rotate cam bolt to adjust
cable.
Page 19 of 23