CYBEX 750A Скачать руководство пользователя

Страница: 24 / 100

Assembly and Set Up
Page 2-8

Cybex Arc Trainer 750A/750AT Owner’s Manual

7. Lift and move unit.

Carefully remove large bolts and shipping

supports.

NOTE: Keep package material on

linkage arms at this time. This will protect the paint
from scratching during assembly.

With one person on each side,

rmly grasp each

rear support leg and lift.

NOTE! Do not grasp plastic pivot covers. Grasping plastic

pivot covers may cause damage to unit. See
Figure 3.

Using proper lifting methods, lift the lower rear

support legs so the front transport wheels are able
to roll on

oor.

Move unit to intended location.

Carefully lower rear support legs.

8. Attach 750A console assembly to handrail

assembly.

NOTE: For 750AT console assembly, skip to step 11.

NOTE: If installing the A/V option, refer to the installation

instructions supplied with the A/V unit.

Locate the console assembly (#2a), handrail

assembly (#2b), saddle washer (#14a) and one
BHSCS .375-16 x 2.25 SS (#14b). See Figure 4.

Locate the contact heart rate cable in the handrail

assembly.

Thread upper contact heart rate cable through the

console mount. See Figure 4.

Attach the console assembly (#2a) to the

handrail assembly (#2b); using a 7/32” Allen
wrench, secure with one saddle washer .390 ID
x .750 OD x 6 (#14a) and one BHSCS .375-16 x
2.25 SS (#14b). See Figure 4.

Figure 3

Lower Rear
Support Legs

Figure 4 (750A)

#2a

#2b

#14a

#14b

Upper Contact

Heart Rate

Cable

#16 (Loctite)

Содержание 750A





































































































Результаты поиска

Содержание 750A

Отзывы:

Похожие инструкции для 750A

Бренды по названию

Популярные бренды

CYBEX 750A, Руководство пользователя

Результаты поиска

Содержание 750A

Отзывы:

Похожие инструкции для 750A

Бренды по названию

Популярные бренды