background image

Assembly and Set Up 
Page 2-2

Cybex Arc Trainer 750A/750AT Owner’s Manual 

Unit Assembly

Tools Required

• 

Phillips screwdriver

• 

Torque wrench

• 

3/16” Allen wrench (supplied)

• 

7/32” Allen wrench (supplied) (2)

• 

9/16” Open-end wrench

NOTE: The words “left” and “right” denote the user’s orientation.

1. Read and understand all instructions thoroughly before assembling unit.

2. Verify correct package.

Read box label to verify the model number and voltage (optional) match what was ordered.

A. 

Lift and remove cardboard sleeve surrounding unit.

B. 

Verify paint color matches what was ordered.

C. 

Verify correct voltage if option AC power kit is included.

D. 

3. Unpack and verify 750A contents of carton. 

NOTE: For 750AT content verifi cation, skip to step 5.

See 750A content listing and Figure 1a for 750A carton contents. 

A. 

Check off each item as found. See 

B. 

Customer Service – Chapter 5

 for contact information if any 

parts are missing.

750A Contents

 

Item Qty  Part 

Number  Description

 

1

  

1

  

Varies

 

Base with covers attached

 

2a

 

1

  

Varies

 

Console assembly (in box)

 2b  1  750A-124 

Handrail 

assembly

 

3

 

2

  

12090-322

 

Foot pad

 4  1  740A-370 

Tray, 

Main

 5  1  740A-371 

Tray, 

Insert

 

6

 

1

 

NA

 

Hardware pack

 

7

 

1

 

5750-4

 

Owner’s Manual

 

8

 

1

 

750A-402

 

Assembly poster

 

9

 

1

 

750A-391

 

Commercial Arc

 

warranty sheet

 10  1  750A-392

 

Consumer Arc warranty sheet 

Содержание 750A





































































































Отзывы: