Your 700 series cycle may be equipped with CardioTouch
TM
technology, bringing
you the convenience and accuracy of the most advanced heart rate monitoring
system available.
Easy to Use
Using CardioTouch is simple, because no special setup is required. Just select
the workout routine you prefer and begin exercising. To see your pulse, simply
touch both right and left CardioTouch sensors. The pulse symbol will begin
flashing in the "Heart Rate" field of your console, indicating that CardioTouch has
gone to work. Your heart rate will display within a few seconds.
Heart Rate Control Compatible
If you prefer to use one of the built-in Heart Rate Control workout routines,
simply select the workout of your choice, as described in Chapter 5, touch the
CardioTouch sensors, and begin to exercise. Although it is best to remain in
contact with the sensors, it is okay to let go occasionally.
Versatile
The CardioTouch grip is made of a conductive rubber for comfort. This system
requires only a light touch from each hand on the grips to register the heartbeat.
In fact, the CardioTouch system is so sensitive that it can sense your pulse by
making contact with any combination of wrists, forearms, fingers, or palms. Just
remember, you must touch the grips on the left and right sides at the same time
to get the heartbeat signal.
Not Getting a Reading?
If your heart rate does not appear on the console, or if it changes erratically, the
reason could be:
•
Biological differences:
Due to biological differences among people, the
clarity of the electrical heartbeat signal that CardioTouch senses can vary
greatly. For this reason, CardioTouch may not be able to calculate the correct
heart rate for some people. This is a common limitation among all handgrip-
style heart rate monitors.
•
Environmental Differences:
CardioTouch's performance can also be affected
by body oils, the type of clothing you're wearing, humidity levels, or electrical
interference.
Chapter 6 -
CARDIOTOUCH
TM
Heart Rate Monitor
Page 6-1
©
©
©
