Chapter 3 LCD Panel
34
SM 180-600 KMFX User Manual
INV
Long press, transfer to the inverter
MUTE
Long press to switch between turning off and on the buzzing
Attention
When bypass frequency is over track, there is interruption time(less than 10ms) for transferring
from bypass to inverter.
3.3.3 LCD touch Screen
Users can easily browse the information, operate the UPS, and set the parameters through the
LCD touch screen, which is friendly for users.
After the monitoring system starts self-test, the system enters the home page, following the
welcome window. The home page is shown in Fig.3-4.
System
information
Power path
Current
warning
messages
Main menu
Fig.3-4 Home page
Home page consists of Status bar, Information display, warning information and main menu.
Status bar
The Status bar contains the model of the product, capacity, operational mode , and the
number of the power module and the time of the system.
Warning Information
Display the warning information of the cabinet.
Information Display
Users can check the information of the cabinet in this area.
The bypass voltage, main input voltage, battery voltage, and output voltages are
presented in the form of gauge.
The loads are displayed in the form of bar chart in percentage. The green area stands for
a load of less than 60%, yellow area for a load of 60%-100% and red area for a load of
more than 100%.
The energy flow mimics the flow of the power.
Main Menu
The main menu includes Cabinet, Module, Setting, log, Operate and Scope. Users can
operate and control the UPS, and browse all measured parameters through main menu.
The structure of the main menu tree is shown in Fig.3-5.
