CyberPower PR2200, Руководство пользователя

Страница: 10 / 18

9
Definitions for led indicators
Power
On
Wiring
Fault
AVR
Using
Battery Circuit
Breaker Alarm
Condition
On Off Off Off Set Off Normal
On Off Flash Off Set Off
AVR- Max. boost 15% of input
voltage for output regulation while
input voltage is from 8% to 30%
under nominal.
On Off On Off Set Off
AVR- Max. buck 15% of input
voltage for output regulation while
input voltage is from 8% to 26%
over nominal.
Off On/Off Off On Set Two
beeps
Utility Failure- The UPS is
providing battery power to the
Battery-Power Supplied outlets.
Off Off On On Set Rapid
beeps
Utility Failure- The UPS is
providing battery
power.Rapid beeps indicate the
battery will run out of charge
within a few minutes.
On/off On/off/ On/off
flash
On/off Set Long
beeps
Overload- Turn the UPS off and
unplug at least one piece of
equipment from the UPS. Wait 5
seconds, reset the circuit breaker
and restart the UPS.
Off Off Off On Up Long
beep
Overload- Turn the UPS off and
unplug at least one piece of
equipment from the UPS. Wait 5
seconds, reset the circuit breaker
and restart the UPS.
On On/Of On/Off
Flash
Off Set On
Weak Battery- Recharge the
battery for at least 8 hours. If
Check Battery is illuminated,
contact CyberPower Systems
for battery replacement
information.
On On/Of On/Off
Flash
Off Set On
Weak Battery- Recharge the
battery for at least 8 hours. If
Check Battery is illuminated,
contact CyberPower Systems
for battery replacement
information.
On On/Of On/Off
Flash
Off Set On
Weak Battery- Recharge the
battery for at least 8 hours. If
Check Battery is illuminated,
contact CyberPower Systems for
battery replacement information.