8
Status Display screen without changing any settings.) The Mode details are described in the following table.
Press Display button to choose the mode you prefer. When the mode is chosen, press 8 seconds to save the
setting. If the Display button is not touched for 3 minutes, you will leave
Setup Mode
and return to UPS
LCD
Status Display
screen.
Function Setup
Mode Setup
Icon
Description
Sensitivity
Low
(86-142Vac)
This unit is least sensitive to
voltage fluctuations.
Medium
(88-139Vac)
This is the default setting.
High
(90-136Vac)
This unit is most sensitive to
voltage fluctuations.
LCD Always On
On
The LCD is always on, whether or
not the LCD button is pressed.
Off
In Line Mode, if the LCD display
button is not touched for 1 minute,
the UPS will enter Sleeping Mode.
The LCD will not appear until the
display button is pressed. In
Battery Mode, the LCD is always
on.
Self Test
On
The Self Test function is on. In
Line Mode, the UPS will switch to
battery mode to simulate the
power failure condition. In Battery
Mode, the UPS has no action.
Off
The Self Test function is off. The
UPS has no action.
ESC
N/A
Return to the LCD Status Display
screen.
