CyberPower OL10000RT3UPDU Скачать руководство пользователя страница 26

 

Copyright ©  2017 CyberPower Systems, Inc.

 

PRODUCT REGISTRATION

 

 

 

25

 

 

CyberPower  requests  that  you  complete  and  return  the  Warranty  Registration  Card  enclosed  with  the  Product  or  register  the  Product  at  its  website 
(www.cpsww.com) to establish that you are the Initial Customer of the Product, and therefore entitled coverage under the Limited Warranty and the Connected 
Equipment  Guarantee.  (Registration  is  not  required  for  coverage,  but  note:  if  you  do  not  register  your  purchase,  you  will  be  required  to  provide  proof  of 
purchase.)

 

 

 

Read the following terms and conditions carefully before using the CyberPower OL6000RT3UPDU / OL8000RT3UPDU / OL10000RT3UPDU / OL6KRT3UHW 
/  OL8KRT3UHW  /  OL10KRT3UHW.  By  using  the  Product  you  consent  to  be  bound  by  and  become  a  party  to  the  terms  and  conditions  of  this  Limited 
Warranty and Connected Equipment Guarantee (together referred to as this “Warranty”). If you do not agree to the terms and conditions of this Warranty, you 
should return the Product for a full refund prior to using it. 

Who is Providing this Warranty? 

CyberPower Systems (USA), Inc. (“CyberPower”) provides this Limited Warranty. 

What Does This Warranty Cover? 

This warranty covers defects in materials and workmanship in the Product under normal use and conditions. It also covers equipment that was connected to 
the Product and damaged because of the failure of the Product. 

What is the Period of Coverage? 

This warranty covers the Product for three years and connected equipment for as long as you own the Product. 

Who Is Covered? 

This warranty only covers the original purchaser. Coverage ends if you sell or otherwise transfer the Product.

 

How Do You Get Warranty Service? 

1. Before contacting CyberPower, identify Your Product model number, the Purchase Date, and each item of Connected Equipment. 

2. Email us at [email protected] or Call us at (877) 297-6937. 

3. If your product requires warranty service you must provide a copy of your dated purchase receipt or invoice. 

How Do You Open A Connected Equipment Claim? 

1. Call us at (877) 297-6937 or write to us at Cyber Power Systems (USA), Inc., 4241 12th Ave. E., STE 400, Shakopee, MN 55379, or send us an e-mail 
message at [email protected] for instructions, within 10 days of the occurrence. 

2.  When  you  contact  CyberPower,  identify  the  Product,  the  Purchase  Date,  and  the  item(s)  of  Connected  Equipment.  Have  information  on  all  applicable 
insurance or other resources of recovery/payment that are available to the Initial Customer and Request a Claim Number. 

3. You must provide a dated purchase receipt (or other proof of the original purchase) and provide a description of the damage to your connected equipment. 

4. Pack and ship the product to CyberPower and, if requested, the item(s) of Connected Equipment, a repair cost estimate for the damage to the Connected 
Equipment, and all claim forms that CyberPower provides to you. Show the Claim Number on the shipping label or include it with the product. 

You must 

prepay all shipping costs, you are responsible for packaging and shipment, and you must pay the cost of the repair estimate.

 

How Long Do I Have To Make A Claim? 

All claims must be made within ten days of the occurrence.

 

What Will We Do To Correct Problems? 

CyberPower will inspect and examine the Product. 

If the Product is defective in material or workmanship, CyberPower will repair or replace it at CyberPower's expense, or, if CyberPower is unable to or decides 
not to repair or replace the Product (if defective) within a reasonable time, CyberPower will refund to you the full purchase price you paid for the Product 
(purchase receipt showing price paid is required). 

If it appears that our Product failed to protect any equipment plugged into it, we will also send you forms for making your claim for the connected equipment. 
We will repair or replace the equipment that was damaged because of the failure of our Product or pay you the fair market value (NOT REPLACEMENT 
COST) of the equipment at of the time of the damage. We will use Orion Blue Book, or another a third-party valuation guide, or eBay, craigslist, or other 
source  to  establish  that  amount.  Our  maximum  liability  is  limited  to  $300,000  for  OL6000RT3UPDU  /  OL8000RT3UPDU  /  OL10000RT3UPDU  / 
OL6KRT3UHW / OL8KRT3UHW / OL10KRT3UHW.

LIMITED WARRANTY AND CONNECTED EQUIPMENT GUARANTEE 

Содержание OL10000RT3UPDU





























Отзывы: