8
Copyright © 2009 CyberPower Systems, Inc.
Expansion Port
Provides SNMP Card Communication
OFF
ON
BATTERY
PACK
INPUT:
48V
(Change Only)
AC INPUT
AC OUTPUT
RESET
Push To
1
48V
OUTPUT:
Serial Port II
(PRIMARY)
Serial Port I
IN
EPO
OUT
AC INPUT
16A MAX
BATTERY
PACK
48V
ON
Push To
AC INPUT
AC OUTPUT
(Change Only)
RESET
INPUT:
OFF
PACK
BATTERY
OFF
INPUT:
2
RESET
(Change Only)
AC OUTPUT
AC INPUT
Push To
ON
48V
Expansion Port
Provides SNMP Card Communication
Serial Port II
(PRIMARY)
Seri al Port I
IN
EPO
OUT
AC INPUT
16A MAX
48V
OUTPUT:
48V
OUTPUT:
Electrical Installation Guide
CAUTION! Before connecting the Battery Pack(s) to the UPS, completely turn off and
unplug the main UPS from the wall receptacle.
CAUTION! Do not disconnect the any Battery Packs when the UPS is turned on or
plugged into a wall receptacle.
CAUTION! Do not connect the battery pack into itself.
CAUTION! Do not add more Battery Packs to the UPS than is specified in the
Technical Specifications section of the User’s Manual. This will result in overloading
the unit and will void the warranty.
Step 1: Turn off your existing UPS system
Safely power-down your UPS system and unplug it from the wall receptacle.
Step 2: Connect the Battery Pack to the UPS
Plug the Battery Pack into the
UPS. Ensure the color coded
Battery Pack connector lines up
correctly with the colors in the
UPS socket.
If connecting multiple Battery
Packs, simply use the available
socket(s) on the Battery Packs to
add additional packs. CAUTION:
Do not add more Battery Packs to
the UPS than is specified in the
Technical Specifications section of
the User’s Manual.