CyberPower 10K On-Line series, Руководство пользователя, Страница: 39 / 43

Over Charge Battery is over
charged The UPS will turn off the
is normal
Model Pin Error UPS internal fault Consult dealer.
Ambient Over
Temperature The ambient
temperature is too
high Check the environment
ventilation.
Heatsink Over
Temperature Inside temperature of
UPS is too high Check the ventilation of UPS
and the ambient temperature.
Ambient NTC abnormal UPS internal fault Consult dealer.
Para Cable Male Loss The parallel cable is
disconnected Check the parallel cable.
Para Cable Female
Loss The parallel cable is
disconnected Check the parallel cable.
Para Bat Differ The battery packs of
some UPSs are
disconnected Check if all the battery pack is
connected.
Para Line Differ The mains input of
some UPSs is
disconnected Check the building wiring and
input cable.
Check if the input breaker is
closed.
Ensure the UPSs are
connected to same input
source.
Para Work Mode Differ There are different
power strategy setting
in parallel system The UPSs with different power
strategy setting (Ex. one Line
are forbidden to parallel.
Para Rate Power Differ There are different
UPSs in parallel
system The UPSs with different
capacity (Ex. one 6KVA and
one 10KVA) are forbidden to
parallel.
ECO In Para ECO function is
enabled in parallel
system ECO function is forbidden in
parallel system.
IP Fuse Open Input fuse break Check the input fuse status
36