ZPC-GX31 User Guide
i
FCC & CE COMPLIANCE
Federal Communication Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection. This equipment generates, uses, and can emit radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Warning:
Shielded cables must be used in order to comply with emission limits. Changes or
modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
COPYRIGHT NOTICE
©Copyright 2008
The information contained in this User Guide and all accompanying documentation is copyrighted
and all rights are reserved. This publication may not, in whole or in part, be reproduced,
transcribed, stored in a retrieval system, translated into any language or computer language, or
transmitted in any form whatsoever without the prior written consent from the manufacturer,
except for copies retained by the purchasers for their personal archival purposes. The
manufacturer reserves the right to revise this User Guide and all accompanying documentation
and to make changes in the content without obligation to notify any person or organization of the
revision or change.
All trademarks mentioned in this document are acknowledged.
The specifications in this guide are subject to change without notice.