background image

ZPC-GX31 User Guide

 

 

2                                                                                                                                            I n t r o d u c t i o n  

1.2  The Indicator Panel and Control Buttons 

 

Figure 1  Indicator Panel 

 
There are six LEDs on the ZPC-GX31 indicator panel as follows from left to right: 
 

Num lock LED 

This LED indicates the on/off status of the Num lock key. 

Caps lock LED  This LED indicates the on/off status of the Caps lock key. 
Scroll lock LED  This LED indicates the on/off status of the Scroll lock key. 
LAN link LED 

This LED will light to indicate good Ethernet cable connection. 

LAN active LED  This LED will light to indicate Ethernet data flow. 
HDD LED 

This LED will light to indicate hard disk drive activity. 

 
There are five Control Buttons on the ZPC-GX31 indicator panel as follows from left to 
right: 
 

LOG OFF 

Hotkey that launches the MS Windows logon screen prompt   

FAV 

Hotkey that launches the Default Browser Favorites/Bookmarks 

www 

Hotkey that launches the Default Internet Browser Application 

MAIL 

Hotkey that launches the Default EMAIL Application 

Power Button 

This Button powers the unit On/Off, & launches/recovers the 
unit into/out of Suspend mode 

 

Содержание ZPC-GX31
















































Отзывы: