Connections on the Back Panel
The back panel is where you’ll find all the physical connections for the DVD Player. You will only use one Video and
one Audio connection at any given time. For instance, if you’re using the Composite Video jack to connect to your TV,
the S-Video and Component connectors will be unused.
Component Video Connectors
Y, Pr & Pb connectors for use with TVs
compatible with Component Video.
AC Power Inlet
Insert the power cord here first. Then,
plug other end to AC Outlet (100-230V).
Composite Video Connector
Typical connection. Connect Yellow
cable to TV Video In.
CoAxial Digital Audio Connector
Use special CoAxial Digital Audio Cable to
connect to Digital Receiver’s CoAxial Input.
Optical Digital Audio Connector
Use special Optical Digital Audio Cable to
connect to Digital Receiver’s Optical Input.
S-Video Connector
Use special S-Video Cable to
connect to TV’s S-Video In jack.
Back Panel Connectors
12
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISK OF ELECTRIC SHOCK
DO NOT OPEN
OPTICAL
VIDEO
VIDEO
S-VIDEO
OUT
AUDIO
AUDIO
DIGITAL OUTPUT
R
L
VIDEO
VIDEO
AUDIO
AUDIO
Y
Pb
Pr
VIDEO
OUT
VIDEO
VIDEO
AUDIO
AUDIO
DTS/DOLBY 5.1CH DIRECT OUTPUT
AUDIO
AUDIO
SUB WOOFER
CENTER
SURROUND
FRONT
R
L
COAXIAL
ANALOG OUTPUT
ON
OFF
I
O
AC IN
100V-230V
50Hz/60Hz
AC SWITCH
AC Power Switch
Turns the main power OFF/ON. Must
be set to ON for unit to operate.
Stereo Analog Audio Outputs
Use White/Red Audio Cable to connect
to Audio In (L/R) of TV or Receiver.
Dolby/DTS 5.1 Channel Outputs
Connect to Dolby-Ready Receiver or Speaker System.