APPENDIX A
25
®
Using a VESA
-compliant Wall or Desk Mount
TM
Your unit is compliant with the VESA ® FDMI
Standard for mounting interfaces, hole patterns and associated
cable/power supply locations for LCD monitors. Mounting hardware come in different types and sizes, and are available
through third party manufacturers. Please consult your dealer on availability. When ordering, make sure the hardware is
compatible with VESA MIS-D, 100, C compliant monitors. Mounting screw holes are provided on the back of your LCD
television. These are protected by plugs that can be pulled out easily to reveal the screw holes. (See Illustration 1)
When mounting, please follow your mounting hardware’s manufacturer’s instructions for installation and use.
To remove your unit’s stand, follow instructions in Illustration 2.
Illustration 1
Mounting holes
with plugs installed.
Plugs can easily be
removed simply by
pulling them off with
your fingers.
1
2
1
2
3
4
5
6
7
8
Illustration 2
I. Locate your unit’s stand
and screws 1 and 2.
II. Lay your
Television screen on
a soft surface such
as a mattress, face
down. Remove
screws 1 and 2 with
a Phillips head
screwdriver.
III. Remove the stand’s
cover by pulling it while
squeezing sides A and B.
A
B
IV. Remove screws 3,4,5 &
6 as shown. Stand should
come off from main unit.
V. Remove remaining screws 7
and 8. This should completely
remove all your unit’s stand
hardware. Please keep them in
a safe place for future use.
