Installing the VoIP V2 Paging Amplifier
Configure the Paging Amplifier Parameters
Operations Guide
930363B
CyberData Corporation
16
2.3 Configure the Paging Amplifier Parameters
To configure the Paging Amplifier online, use a standard web browser.
Configure each Paging Amplifier and verify its operation
before
you mount it. When you are ready
to mount a Paging Amplifier enclosure, refer to
Appendix A, "Mounting the Amplifier"
for instructions.
All Paging Amplifier are initially configured with the default IP settings indicated in
Table 2-8
.
When configuring more than one Paging Amplifier, attach the Paging Amplifiers to the network one
at a time to avoid IP address conflicts.
Table 2-8. Factory Default Settings
Parameter
Factory Default Setting
IP Addressing
DHCP
IP Address
a
a. Default if there is not a DHCP server present.
10.10.10.10
Web Access Username
admin
Web Access Password
admin
Subnet Mask
a
255.0.0.0
Default Gateway
a
10.0.0.1
