Installing the VoIP V2 Paging Amplifier
Paging Amplifier Setup
Operations Guide
930363B
CyberData Corporation
10
2.2.3 Paging Amplifier DIP Switches
See
Figure 2-6
to identify the DIP Switches.
Figure 2-6. DIP Switches
See the following tables for the DIP Switch settings:
Table 2-3. DIP Switch Settings—Low Power—802.3af Compliant
DIP Switch
Default Setting
Description
1
OFF
Sets PoE for 802.3af class.
2
N/A
Not applicable for power setting.
3
ON
Switch mode current set to
LOW
.
4
OFF
Low gain amplifier setting.
Table 2-4. DIP Switch Settings—High Power—802.3at Compliant
a
a. If set to high power, the unit will not power ON with 802.3af compliant switch. You must use a
power injector in this mode (CyberData Part Number 011124).
High power PoE mode
conforms to IEEE 802.3at draft 3.0.
DIP Switch
Setting
Description
1
ON
Sets PoE for 802.3at class.
2
N/A
Not applicable for power setting.
3
OFF
Switch mode current set to
HIGH
.
4
ON
Force high gain amplifier.
Table 2-5. DIP Switch 2 Settings
DIP Switch
Setting
Description
2
OFF
Manual Vol
. The speaker volume is set manually by the analog
volume trimmer.
2
ON
Bypass
. Bypasses the manual volume control of the analog volume
trimmer and uses the web page volume settings.
