CyberData VoIP V2, Руководство по эксплуатации

Страница: 16 / 45

Installing the VoIP V2 Paging Amplifier
Paging Amplifier Setup
Operations Guide 930363B CyberData Corporation
9
High Power Mode Figure 2-5. Using the Amplified Outputs—High Power Mode
Non-PoE Ethernet Switch
Cat 5 Ethernet Cable
802.3at PoE Injector (high power mode)
2 speakers in parallel (4 Ohm total)
+
Note : Use wire nuts to connect wire
from the speakers to 16 gauge wire.
Note : You can use an 802.3at
compliance switch instead of an
802.3at power injector and hub.
Twist wire nuts
Optional 2 Speaker Configuration
(802.3at mode)
8 Ohms
Standard 1 Speaker Configuration
(802.3af mode)
8 Ohms
16 gauge wire
25 feet maximum distance
+ +
- -
Use 16 gauge wire coming out of screw terminals.
Note : Make sure that the wire length going to the
wire nuts is kept short (approximately 6 inches).