Installing the VoIP V2 Loudspeaker Amplifier
Configure the Loudspeaker Amplifier Parameters
Operations Guide
930361G
CyberData Corporation
32
2.3.7 Configure the Sensor Configuration Parameters
The sensor (pins 1 and 2) on the header can be used to monitor something’s open or closed state.
There is an option on the
Sensor Configuration
page to trigger on an open or short condition on
these pins.
For the sensor there are three actions that the Loudspeaker Amplifier can do:
●
Activate the relay until the sensor is deactivated
●
Loop an audio file until the sensor is deactivated
●
Call a preset extension and play a pre-recorded audio file (loops until user hangs up)
Note
Calling a preset extension can be set up as a point-to-point call, but currently can't send
delayed DTMF tones.
1. Click
Sensor Config
to open the
Sensor Configuration
page (
Figure 2-24
).
Figure 2-24. Sensor Configuration Page
