Installing the VoIP V2 Loudspeaker Amplifier
Loudspeaker Amplifier Setup
Operations Guide
930361G
CyberData Corporation
12
2.2.5 VoIP V2 Loudspeaker Amplifier System Installation and Connection
Options
The following figures show the connection options for the VoIP V2 Loudspeaker Amplifier.
Figure 2-8. Loudspeaker Amplifier Connections
Figure 2-9. Sensor Connection
Figure 2-10. Relay or Strobe Alert Connection
Figure 2-11. Line-In Connection
1-Sense (+)
2-GND
3-Relay COM
4-Relay NO
5-Line-In(+)
6-Line-In(-)
7-Line-Out(+)
8-Line-Out(-)
9-Spkr Out(+)
10-Spkr Out (-)
CLASS
II
WIRING
See
Figure 2-9
See
Figure 2-
See
Figure 2-
See
Figure 2-
See
Figure 2-13
Amplifier
Amplifier
+12V Strobe
When the Loudspeaker Amplifier is
called from a remote phone, the
relay on the Loudspeaker Amplifier
can be programmed to blink and
drive an Alert Strobe.
Amplifier
When line-in is enabled on
the V2 Amplifier, the audio
received from the line-in
connection will be played
to the speaker(s) and line-
out connection as the low-
est priority audio.
Line Plug
