Installing the VoIP Indoor Office Ringer
Parts List
Operations Guide
930386E
CyberData Corporation
27
2.3.5.1 Point-to-Point Configuration
When the device is set to not register with a SIP server, it is possible to set the Office Ringer to dial
out to a single endpoint.
To set the Office Ringer to dial out to a single endpoint, complete the following steps:
1. Make sure that the
setting on the
is not
enabled. See
field on the
(see
), type the IP
address of the remote device.
3. Select
Save
.
Note
The Office Ringer can also receive Point-to-Point calls. The delayed DTMF functionality is
available in the Point-to-Point Mode. Receiving point-to-point SiP calls may not work with
all phones.
Figure 2-14. SIP Configuration Page
Device is set to NOT register with a SiP server