Installing the VoIP Indoor Office Ringer
Parts List
Operations Guide
930386E
CyberData Corporation
26
2. On the
SIP Configuration
page, enter values for the parameters indicated in
.
3. After changing the parameters, click
Save Settings
.
Table 2-9. SIP Configuration Parameters
Web Page Item
Description
Enable SIP Operation
Enables or disables SIP operation.
SIP Settings
SIP Server*
Type the SIP server represented as either a numeric IP
address in dotted decimal notation or the fully qualified
host name (255 character limit [FQDN]).
Remote SIP Port*
Type the
Remote SIP Port
number (default 5060)
(8 character limit).
Local SIP Port*
Type the
Local SIP Port
number (default 5060)
(8 character limit).
Outbound Proxy
Type the Outbound Proxy as either a numeric IP address in
dotted decimal notation or the fully qualified host name
(255 character limit [FQDN]).
Outbound Proxy Port
Type the Outbound Proxy Port number (8 character limit).
SIP User ID*
Type the
SIP User ID
(up to 64 alphanumeric
characters).
Authenticate ID*
Type the
Authenticate ID
(up to 64 alphanumeric characters).
Authenticate Password*
Type the
Authenticate Password
(up to 64
alphanumeric characters).
Register with a SIP Server
Check this box to enable SIP Registration.
For information about Point-to-Point Configuration, see
Section 2.3.5.1, "Point-to-Point Configuration"
Re-registration Interval (in seconds)*
Type the SIP Registration lease time in minutes (default is
60 minutes) (8 character limit). Re-registration Interval (in
seconds)*
Unregister on Reboot*
When selected, on boot, the device will first register with a
SIP server with a expiration delay of 0 seconds. This has
the effect of unregistering any current devices on this
extension.
RTP Settings
RTP Port (even)
Specify the port number used for the RTP stream after
establishing a SIP call. This port number has to be an even
number and defaults to 10500.
Click the
Save
button to save your configuration settings.
Note
: You need to reboot for changes to take effect.
Click on the
Reboot
button to reboot the system.