Cyber Sciences CyTime SER-32e Скачать руководство пользователя страница 7

Страница: 7 / 46

www.cyber-sciences.com

INSTRUCTION BULLETIN—Reference Guide

CyTime

Sequence of Events Recorder

IB-SER32e-02

Jan-2022

Date/Time Conventions

The CyTime SER-32e provides a user-configurable setting for time zone offset: the

time in hours to add to or subtract from Coordinated Universal Time (UTC) to adjust

for local time.

The CyTime SER supports adjustments for Daylight Saving Time (DST) or Summer

Time. However, Cyber Sciences recommends that event timestamps be based

exclusively on UTC or standard time, since discontinuities introduce potential for

confusion and make comparisons of historical values more difficult. If an adjustment

for DST is desired, this should be made by application software at the end point of

consumption (for display or analysis). This topic is discussed in more detail later in

this document.

Three (3) different conventions are used by the SER to store the current date/time,

depending on the context:

●

Expanded (7-register) format, in which each element (year, month, day, hour,

minute, second), is stored in a separate register. Example: present date/time, in

registers 400203 to 400209.

●

Condensed (3 or 4-register) format, in which two elements are stored per

present date/time, condensed, in registers 400210 to 400212.

●

Compressed (2-register, 32-bit unsigned integer) format, in which the

date/time is expressed in seconds since the “epoch” date of Jan 1, 1984.

Example: SER event log, registers 3 and 4 in each event record.

Note: Where applicable, the SER uses “big-endian”

encoding, consistent with Modbus standards. That

is, the most significant byte or word is stored in the

first position, or lowest register. The one exception is

the event log—here encoding is reversed (“little-

endian”) to maintain compatibility with legacy

event recorders.

Byte Order

Modbus protocol is based on 16-bit registers, each of which can contain up to 2

bytes. Unsigned values greater than 65535 are encoded as 32-bit integers using 2

registers, 4 bytes total. The order in which these bytes are stored must therefore be

known for the data to be retrieved and correctly interpreted. Modbus declares itself

as a ‘big-endian” protocol, per Modbus Application Protocol Specification, V1.1.b:

“Modbus uses a ‘big-endian’ representation for addresses and data items. This means

that when a numerical quantity larger than a single byte is transmitted, the most signifi-

cant byte is sent first.”

Following this convention, the SER stores all values as “big-endian” except where

noted otherwise.

A copy of the Modbus protocol specification is available for free download from the

Modbus web site:

www.modbus.org/specs.php

High-byte (MSB)

Low-byte (LSB)

Month (0 - 12)

Day (0 - 31)

Year (0 - 199) (add 1900)

Hour (0 - 23)

Minute (0 - 59)

Second (0- 59)

(optional)

Milliseconds (0 - 999)

Table 1-1 – Condensed Date/Time Format (with optional ms)

Note: To get the year, add 1900 to the value in register 2 high-byte (e.g., a value of 112 in

register 2/high-byte represents 112 + 1900 = the year 2012).

Содержание CyTime SER-32e














































Результаты поиска

Содержание CyTime SER-32e

Отзывы:

Похожие инструкции для CyTime SER-32e

Бренды по названию

Популярные бренды

Cyber Sciences CyTime SER-32e, Инструкционный бюллетень

Результаты поиска

Содержание CyTime SER-32e

Отзывы:

Похожие инструкции для CyTime SER-32e

Бренды по названию

Популярные бренды