Cyber Console IC-1704 Скачать руководство пользователя страница 15

Страница: 15 / 16

- 15 -

F/W version is the updated version.

TROUBLESHOOTING

Confirm whether or not the cable is good and connected properly

Q1 :

What should we do if the keyboard has no response?

A1a:

Reboot the PC.

A1b:

For Auto Scan Mode, press [Esc] to exit.

Q2 :

What should we do if the mouse has no respond?

A2a:

Reboot the PC.

A2b:

For Auto Scan Mode, press [Esc] to exit.

Q3 :

What should we do if the OSD cannot display normally?

A3a:

If the KVM switch is a standalone, then power off the PC. Unplug the special cable of

the KVM switch and then power on the KVM switch. Connect the special cable of the

KVM switch and power on the PC.

A3b:

If the KVM switch is connected in series, then power off the PC. Unplug the special cable

of the KVM switch. Power on the master KVM switch and then start the slave KVM

switch. Connect the special cable to the KVM switch and power on the PC.

Q4 :

What should we do if there is a video problem?

A4 :

The quality of cable is not good enough. Please use high-quality Smart View cables.

Trademarks:

All the companies, brand names, and product names referred to this manual are the trademarks or

registered trademarks belonging to their respective companies.

Содержание IC-1704

















Результаты поиска

Содержание IC-1704

Отзывы:

Похожие инструкции для IC-1704

Бренды по названию

Популярные бренды

Cyber Console IC-1704, Руководство пользователя

Результаты поиска

Содержание IC-1704

Отзывы:

Похожие инструкции для IC-1704

Бренды по названию

Популярные бренды