Cyber Acoustics CA-3858BT, Руководство пользователя

Страница: 9 / 20

8
Controls and Features
• Power—the on/off button is on the side of the control pod. Slide to turn the speaker on or off.
• Master Volume Control—this volume is on the top of the control pod and is indicated by the words “MAX”
and “MIN.” Rotate clockwise to turn the volume up, and counter-clockwise to turn the volume down.
• Input selection button – Use this button to switch between your audio source (Bluetooth and AUX IN)
• Bass Volume Control – the bass volume is located on the side of the control pod. Turn knob to the right to
increase bass, turn knob to the left to decrease.
• Headphone Output Jack—connect your headphones to this jack and they will mute the speaker system
automatically. The master volume can then be used to turn the volume up or down to your headphones.
• Auxiliary Input Connection—the auxiliary input jack allows the connection of a second audio source.
• LED
Blinking Blue – Device is under pairing mode
Blue – Bluetooth device connected for play back
Green – Audio playback through 3.5 mm input
Power on / off
Headphone output jack
LED
Bass volume control
Master volume control
Input selection button
Auxiliary input jack
Multi-function Control Pod
Trouble shooting Bluetooth connections
Can’t connect for the first time
1. Turn off the speaker completely and then turn on the speaker. Follow the above manual on Bluetooth Connection
for 1st time connection.
Can’t connect when returning to the speaker system
1. If the system does not automatically reconnect with your Bluetooth-enabled device, you may need to physically
go to your device’s Bluetooth setting and manually select again “CA-3858BT” to reconnect.
2. You may also try going to your device’s Bluetooth settings and select “Forget this device” to remove the speaker
system from the list. You may need to turn off the Bluetooth function on your devices to fully clear the list. Then see
steps above by following the Bluetooth Connection for 1st time connection.
3. Check to see if any other devices are already connected to the system. The first indication for this is the speaker
LED status light will show solid Blue. The speaker can only pair with one device at a time. Go to that source
device to disconnect from the system first. Then you can follow the above steps for 1st time Bluetooth Connection.
Audio is choppy or keeps disconnecting
1. Be sure to check your room environment. Bluetooth technology has a range limit of approximately
30 feet - line of sight. This generally means your best results will be limiting your source device and speakers to
the same room. Extremely large rooms, or rooms with a lot of wireless electronics, wi-fi routers, etc., may affect
the quality of sound, connection or connection consistency.
2. Check for obstructions, walls, too many people, or other objects that might impede the Bluetooth signal.
3. Try returning the Bluetooth source device to a closer proximity with your speakers.