manualshive.com logo in svg

CYBELEC DNC 600S, Руководство пользователя, Страница: 8 / 116

Поделиться
Скачать
CYBELEC DNC 600S Скачать руководство пользователя страница 8

L

IMITATION OF REMEDIES

 

CYBELEC's entire liability and the licensee's exclusive remedy shall be as follows: 

The replacement of any diskettes or EPROMS or magnetic support media or cassettes not meeting 
CYBELEC's limited warranty and which materials are returned to CYBELEC or an authorized 
CYBELEC representative with a copy of the packing slip, or 

If CYBELEC or its representative is unable to deliver replacement diskettes, magnetic support media, 
EPROM or cassettes which are free of defects in materials or workmanship, the licensee may terminate 
this agreement under the terms and conditions herein mentioned, and the purchaser's money will be 
refunded. 

G

ENERAL

 

The licensee acknowledges that he has read this agreement, understands it and agrees to be bound by its 
terms and conditions. 

The licensee agrees to hold CYBELEC harmless on all liability associated with licensee's breach of this 
agreement including, but not limited to, all reasonable attorney's fees and court costs, if any. 

This licence agreement shall be governed by Swiss law; place of jurisdiction is Lausanne, Switzerland. 

M

AINTENANCE

 

CYBELEC will provide one year of software maintenance.  The extent of maintenance, and response 
time for furnishing same, shall be at the sole discretion of CYBELEC.  Maintenance shall normally 
include correction of errors in code, correction of errors in supporting documentation, update versions of 
the covered software which may be released by CYBELEC during the maintenance period. 

In no event shall CYBELEC be obliged to provide technical support in attempting to resolve problems or 
difficulties resulting from licensee's modification of the licensed software; any such modification by 
licensee is entirely at licensee's own risk. 

 

 

LICENSE AGREEMENT 

PAGE  V 

Содержание DNC 600S





















































































































Отзывы:

Нет отзывов