CYBELEC DNC 600S, Руководство пользователя, Страница: 64 / 116

A
PPENDIX
G: M
ISCELLANEAOUS
INITIALIZATION P
AGE
This page appears if a s impossible, due to unprogrammed data
r an incorrect value.
can also appear as a result of pollution of one of the memory zones which
possible calculations.
calculation i
o
It
will also give im
INITIALIZATION DNC PS
_ Clear variables zone
_ Clear punches-dies zone
_ Clear machine parameters zone
EXECUTION CODE ___
"
asis.
o display the initialization page:
It can be necessary to display this page intentionally in order to clear
mpletely the data of the DNC and to re-start the programming on a "clean co
b
T
Switch on the machine by pressing the and keys.
In case of unexpected apparition of the init page, proceed as follows:
If point n° 1 does not re-establish a normal situation, go on to the next point
and so on.
The following operations clear successively all the data in the selected
memories.
It is therefore recommended to re-introduce the data.
1) Press the key twice.
2) Enter:
value
1
in the field
Clear variables zone
and value
817
in the field
EXECUTION CODE
.
Press the key.
Press the
key twice.
APPENDIX G: MISCELLANEAOUS PAGE 55