CYBELEC DNC 600S, Руководство пользователя, Страница: 20 / 116

constructor.
- In most of the configurations, it will be
sufficient to give a down command. At this
command, the axes take position, then a
second down command has to be given, in
order to move the beam.
- In other configurations, the provided start
button must be pressed.
- When the message TOL ZONE appears,
that means that a down command has been
given and that the axes are not positionned
in the current sequence. Give a start with
the provided button or on the front panel of
the DNC.
Vy
Beam bending speed.
Programmed at 0, the speed is 1 mm/s.
Programmed at 9, the speed is 10 mm/s.
(If the machine is capable of reaching this
speed)
Vy
Rising speed from BDC to PP.
Programmable from 0 (slow) to 9 (fast).
Allows to vary the speed at which the beam
rises to the PP. (Function depending on the
machine's hydraulics).
Δ
T
Dwell time.
TDC
Distance from top dead center.
SP Distance from the beam speed changing point.
(Switch Point).
F1: - F5:, Cr Value of the auxiliary functions F1 to F5 and
crowning.
These fields can also be re-programmed by the user.
However, certain fields are related, that is modifying one provokes a
modification of the other.
CREATING A PRODUCT PAGE 11