manualshive.com logo in svg

CYBELEC CybTouch 8 G, Руководство пользователя

Поделиться
Скачать
CYBELEC CybTouch 8 G Скачать руководство пользователя страница 33

27/34

CybTouch 8 G – User Manual

A

ug

.

 

2016  

V3.1

M

SG

 n

r

.

M

eSSaGe

d

eScripTion

W16

Eco mode

This message appears when the Eco mode starts, after the timer 
defined in the machine parameters is over.

W17

Press footswitch to move 
down

W18

Empty field

Operator did not enter a value.

W19

24V I/O power on

24V to the inputs/outputs is now available.

W20

Please select a field

This message is displayed when trying to set the time (see 

Set 

Clock, page 8

) and no field (minute, seconds, etc.) has been 

selected.

W21

Set seconds

In the 

Set Clock

 page, when the corresponding field is selected, 

indicates that it can be set using the up and down arrows.

W22

Set minutes

W23

Set hour

W24

Set day

W25

Set month

W26

Set year

W27

Wizard start

W28

Wizard end

W29

End of list

This message is displayed when reaching the end of the list in 
one of the different menus 

.

W32

Data entry in progress

Operation impossible: data entry in progress. Please finish 
entering data and try again.

W33

Indexation in progress

Operation impossible: indexation in progress. Wait until the 
indexation is finished to try again.

W34

RFlink disconnected

When the RFLink connection to a laptop has been shut down 
from the latter.

W35

Access not allowed

Operator needs another level password.

W37

Moving direction has been 
inverted

Wizard message: Rotary direction of the motor has been 
changed.

W38

Counting direction has been 
inverted

Wizard message: Counting direction of the axis has been 
changed.

W39

Moving and counting 
directions have inverted

Wizard message: Both the rotary direction of the motor and the 
counting have been changed.

W40

OK

Indicates a cycle or operation has properly ended.

W42

No movement executed

Axis Wizard message: Operator pressed 

 but no movement 

was made.

W43

Waiting input “RTS ready”

A switch makes sure the sheet support is in the correct position 
for the operator to move the back gauge to retrieve the cut part. 
Check the RTS switch on the sheet support.

W44

Min BDC limit reached

Minimum BDC limit has been reached, down stroke has been 
stopped. This may occur in manual mode. If this message 
appears often in normal cutting operation, the machine 
parameters need to be readjusted.

W45

Enter unlock interface 
password

This message is displayed when parameter P04.04 Level 0 Lock 
HMI is set to 

yes

 and the screen is touched.

W46

Enter password level 1 or 
greater

This message is displayed when a password of level 1 or higher 
is needed to execute a specific operation.

W47

Enter password level 3

This message is displayed when a password of level 3 or higher 
is needed to execute a specific operation.

Содержание CybTouch 8 G









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды