CYBELEC CybTouch 8 G, Руководство пользователя

Страница: 28 / 40

22/34
CybTouch 8 G – User Manual
A
ug
.
2016
V3.1
7. If necessary, program any of the desired Extra Cutting Features available.
8. Add the next cut to the program by touching .
9. Proceed in the same manner to create the other sequence of the program.
10. Go to the desired step touching the Current step (sequence) number (see page 14)
or using this or this button.
11. Start the hydraulic pump motor (by pressing this button if available. It turns red
when the motor is running).
12. Press the button to position the machine according to the data that were just
entered.
13. When the machine is ready to cut, a button is displayed.
14. Press the foot switch to execute the cut.
n
exT
-p
arT
f
uncTion
This function allows the operator to run two, or several, part-programs one after another.
This is very handy when one wants to make a three dimensional part, like a box for
example, or make a final product composed of several parts.
The CybTouch will execute the current program. At the end of the last sequence, instead
of returning to the first sequence of the current program, the CybTouch switches to the
program selected as
P+nn (i.e. the next one). It goes on like this, as long as a part is
programmed with a next one.
P2 will be executed
after P1