CYBELEC CybTouch 8 G, Руководство пользователя

Страница: 22 / 40

16/34
CybTouch 8 G – User Manual
A
ug
.
2016
V3.1
Cutting length
This parameter defines the width of the sheet metal part that will be cut. It is used to
calculate the end of the cut, i.e. the point where the beam stops moving down and goes
back up. The value is expressed in sec for a fixed angle shear and in mm for a variable
angle shear.
If this parameter is not activated (gray), the CybTouch will not calculate the end
of the cut, and the beam will go all the way down to the BDC.
This function is only available on adjustable angle shears.
The parts counter can count up or down. This can be defined in the User
Preferences (see
Program Counter Mode, page 9 ).
Cutting offset
This parameter allows the operator to enter an offset for the cut. When activated, it is
used in conjunction with the
Cutting length to determine the BDC.
Hold-downs pressure
This parameter allows defining the hydraulic pressure with which the hold-downs will
press on the sheet metal plate. The value entered is a percentage of the maximum
pressure allowed.
Number of parts
The operator can enter here the total amount of parts to be produced. Every time all
the sequences of the program are executed, hence a part is completed, this counter
is updated of one unit. When the amount of parts is reached, a yellow pop-up window
signals it to the operator.