Cwejman S1 MK2, Руководство пользователя

Страница: 33 / 52

How MIDI Messages are Handled
Program Change
Program Change messages with patch #01 restore the parameter settings to their default
values. A currently played note is turned off by making both Gate 1 and Gate 2 inactive, the
CV1 output is held at its latest value. The Note Stack is emptied. All CV Outputs on the S1 that
are programmed for a controller or other function output are cleared, the output is set to 0V
and the Pitch Wheel is centered. All other patch numbers are ignored. Note that restoring the
parameter memory via the Program Change message takes a couple of hundred milliseconds
and during this time no other messages will be handled.
Hold Pedal, Legato Pedal
The Hold Pedal message sustains a note being played by keeping the Gate1 output active
regardless of Note-Off messages. The Gate2 output is affected in the same way when the
message is received on selected MIDI c1.
Legato Pedal messages cause a legato effect by not making the Trig1 output active for Note-On
messages. The Trig2 output is affected in the same way when the message is received on MIDI
1.
All Notes-Off Message
Turns off a played note. Gate1 is made inactive. Pitch output is held at its latest value.
A played note is not turned off if the Hold pedal is active. Gate2 is affected in the same way when
the message is received on MIDI 1.
All Sound-Off Message
Turns off a played note. Gate1 is made inactive. Pitch output is held at its latest value.
A played note is turned off even if the Hold pedal is active. Gate2 is affected in the same way
when the message is received on MIDI 1.
Reset All Controllers Message
Resets all controllers to default states. All CV Outputs on the S1 programmed for a controller
or other function output are cleared, the output is set to 0V and the Pitch Wheel is centered.
Omni On/Off Messages
Turns Omni mode on or off. Note that the second byte in Omni On messages is not recognized
since the S1 is a monophonic instrument. A currently played note is turned off by making both
Gate1 and Gate2 inactive but the CV1 output is held at its latest value. The Note Stack is also
emptied.
Reset Message Received
When the reset message is received the MIDI interface performs a warm reset. The description
regarding Power On describes what happens.
CV Gate/Trigg Configuration
Configuring the CV outputs is made in two steps. First a parameter must be set to define
which MIDI message is to control the output. Then the CV output must be routed to the
desired module.
29