11
9. Press the User/Time button again. The last two characters (Minutes) now blink.
10. The minutes can now be entered by pressing the MEMORY button. (Example: 30 x
presses advances the time from 0 to 30 minutes)
11. Finally, press the time button once to set.
5.5. Reading the set date
After all settings have been made, click the User/Time button once. The date is briefly dis-
played and then the time. The input is now confirmed and the clock begins to run.
5.6. Selection of Microlife Average Mode
Clinical studies demonstrate taking multiple blood pressure readings and calculating
an "average” is more likely to determine your true blood pressure. Your Microlife
Averaging Mode unit allows you to switch the unit to a special Averaging Mode set-
ting (MAM) that automatically takes multiple readings!
Microlife Averaging Mode / MAM:
a) If you would like to take an Average Mode
measurement, please slide the switch to the
right toward MAM.
b) Average Mode takes generally 3 measurements
in succession and calculates the result.
c) A symbol in the display indicates that the
unit is set to the Averaging Mode.
Single mode:
a) If you would like to take single measurement,
please slide the switch toward no. 1.
b) Single mode only has 1 measurement
5.7. Selectiing the User (User 1 or User 2)
1. Press and hold the TIME/DATE button for 3 seconds. The User 1 icon will flash in
the lower left corner of the LCD screen.
2. Press the MEMORY button to toggle between User 1 and User 2.
3. Press TIME/DATE again to make your selection.
1
3
1
3
