12
5.6. Memory – displaying the last 99 measurements
At the end of a measurement, this monitor automatically stores each result with date and
time. This unit stores 99 memories for each of 2 users.
Viewing the stored values
With the unit off, press the "M" button. The display first shows "A", then shows an aver-
age of all measurements stored in the unit.
Please note: measurements for each user
are averaged and stored separately, be certain that you are viewing the meas-
urements for the correct user.
Pressing the "M" button again displays the previous value. To view a particular stored
memory, press and hold the “M” button to scroll to that stored reading.
Memory full
When the memory has stored 99 results a new measured value is stored by overwriting
the oldest value.
Clear all values
If you are sure that you want to permanently remove all stored values, hold down the "M"
button (the instrument must have been switched off beforehand) until "CL" appears and
then release the button. If you do not want to clear the values, press the On/off button. To
permanently clear the memory, press the "M" button while "CL" is flashing.
Individual values cannot be cleared.
5.7. Discontinuing a measurement
If it is necessary to interrupt a blood pressure measurement for
any reason (e.g the patient feels unwell), the ON/OFF button
can be pressed at any time. The device then immediately low-
ers the cuff pressure automatically.
