background image

Page 29 of 31 

 
 

 

WARNING: Fire Guards 

 

 

This appliance is not fitted with an integral guard. In normal 
use consideration may be given to the use of a fireguard 
conforming to BS6539 or BS6778, so that the approach to the 
appliance is limited such that access to the flame is minimised 
 

It is recommended that a fireguard conforming to the requirements of 
BS6539 or BS6778 be fitted if the fire is used in the presence of young 
children, the elderly or the infirm. 
 
The installer is to advise the user not to stand too close to the 
appliance for prolonged periods of time and warn that loose clothing is 
particularly at risk of burning due to the presence of an unguarded 
flame. 
 
In addition, the installer is to advise the user against placing 
combustible material directly in front of the appliance. Floor coverings, 
such as carpets, are considered to be acceptable. 
 

Hearths 

 

For some countries a non-combustible hearth must be fitted in front of 
the fire in accordance with National Regulations (e.g. United 
Kingdom). 
 

 

Metal Cast Bowls 

 
Bowls which are manufactured from Cast Metal are sand cast at a UK 
Foundry and then Hand Polished for over 15 Hours at the CVO Fire 
Factory.  Pitting and Air Holes are a normal occurrence and are a part of 
the unique quality of such a hand made piece. All Bowls are inspected 
and given a full quality control check at the factory. If the Bowl supplied 
includes Pitting and Air Holes this will have passed the in-house 
inspection and cannot be used to form a Warranty claim. We hope that 
you will see that the overall beauty and uniqueness of your CVO Fire 
outweighs what is a very minor feature.  

 

 

 
 

Содержание 0558bl5590
































Отзывы: