Section 4
Working
4.1. Working state manner
The mini cutter has three Working state manners:
“Working”
“Pause”
“Orientation”
STATUS LED is OFF: You can receive the data. You could change the speed
and Force during working.
STATUS LED is ON: The cutter on Pause state, so you can’t receive the data.
When STATUS LED is ON
Press
the paper will move to back.
Press
the paper will move to front.
Press
to cut or draw testing picture.
Press
to Laser Orientation state. It will quit Orientation into Working
state when you keep
going press 5 seconds
The“Working”
state
When press
or
STATUS LED is OFF
,
The cutter will be in working state, it can receive data from computer, .
When the cutter re-starts, t he setting in default is:
A .The Force at the smallest state.
B. Cutting speed=V4, that’s 98mm/s.
20
