2.3 Connection to the power
The indicator light will appear when press the
Then the carriage will
move to right, the pressing wheel will turn (from front) forward and back one
time. It shows that the cutter finishes restart automatically.
If the return is unsuccessful, please press the
button again.
2.4. Loading media
You could use the vinyl in roll or just a piece of A4 /A3 paper.
Steps:
①
Turn on the Power
②
Push the handle down
③
Put the paper in from back of the cutter.
④
Keep the paper with the Checking Line on the same line!
⑤
Up the handle, then the pressing wheel will push go down on the paper.
2.5. Useable size of material available for DC-330/DC240
model:
DC-330 model:
The material width is smaller than 330mm and bigger than 300mm.
The cutting width is smaller than 280 mm, length smaller than 2000mm.
DC-240 model:
The material width is smaller than 240mm and bigger than 210mm.
The cutting width is smaller than 190mm, length smaller than 2000mm.
It’s no limited minimum width if use the Cutting Mat.
2.6. How to use the cutting mat
To avoid the paper moving during work, it’s better to use the Cutting mat
when cut normal paper. And the paper should be sticking on the mat. The
paper size should be smaller than the Cutting mat.
17
