Pub 49004
Effective 9/00
Page 3
Operating Temperature Range
-
40
o
C to 50
o
C (-40
o
F to 122
o
F)
Storage Temperature Range
-50
o
C to 70
o
C (-58
o
F to 158
o
F)
Elevation
Above 2000 Meters (6600 feet) consult factory
Humidity
Functional to 95% non-condensing
Operating Orientation
Any
Pollution Degree IEC 947-1
3
Shock Resistance
15g in any direction
Vibration Resistance
3g in any direction
Environmental Requirements
Mounting Instructions for Models S801N and S801R
The IT Soft Starter is easy to mount. It does not require
any special tools.
To aid you with panel layout, refer to the dimension
drawings on page 2 of this leaflet. Drill and tap holes per
mounting hole location as shown.
To mount the unit, use all the hardware specified in Table
1 on page 2 of this leaflet. Tighten to the torque specified.
TO AVOID SHOCK HAZ-
ARD, DISCONNECT ALL
POWER BEFORE ANY
FUNCTIONS ARE PER-
FORMED ON THIS
EQUIPMENT.
POUR EVITER TOUT
CHOC ELECTRIQUE,
COUPLER L’ALIMENTA-
TION DE CET EQUIPE-
MENT AVANT D’Y EF-
FECTUER DES
TRAVAUX.
AVERTISSEMENT
WARNING
Hazard of Burn or
Electrical Shock
Risque de Brulure ou de
Choc Electrique
Wiring Diagrams
Each diagram illustrates a typical wiring scheme for the
options described. The soft starter is represented by the
terminal board. The additional items shown on the dia-
grams are not included, but they may be purchased from
Cutler-Hammer.
Fig. 3 Elementary Diagram for Soft Starter with
START/STOP/RESET/JOG with 120VAC
Alarm and Run Indication
261348
Table 3
