Cutera Excel HR, Руководство оператора

Страница: 39 / 92

33
EXCEL HR OPERATOR MANUAL
D1796, REV. D, 12/16
Error Code Guide
The excel HR uses state-of-the-art, self-diagnostic software. When the system detects an abnormality
during self-test or while the system is in READY mode, a pop-up screen displays with the corresponding
error code(s). Some errors serve as a warning and are clearable by touching the
button in the pop-
up screen. Others, such as “connect footswitch” and “water low”, are accompanied by an animated
illustration showing what action to take. If the error or abnormal condition is successfully cleared, the
pop-up screen can be cleared by touching the
button.
Below is a brief explanation of some of the codes that may be seen in the advisory pop-up screen. If you
have any questions about this information or the operation and service of your system, contact Cutera
Service
(refer to Appendix C)
.
Error Code Series/Description
Series 100 Codes - Series 100 Codes appear as a warning and typically will not
hinder treatment(s). Most Series 100 Codes are clearable by resuming
treatment or by touching the
button. If after touching the button the code
does not clear, power off and re-start the system.
Series 200 Codes - Series 200 codes are “user clearable” faults and must be
cleared in order to resume treatment(s). To clear, touch the
button. If after
touching the button the code does not clear, power off and re-start the
system.
Series 300 Codes - Series 300 codes indicate a “permanent fault” and the
system must be powered off and re-started to clear the code. If this action fails
to clear the code, contact Cutera Service (
refer to Appendix C
) to schedule an
appointment.
* Contact Cutera Service (
refer to Appendix C
) if additional alert codes appear.
If any error codes or symptoms occur that are not addressed in the troubleshooting guide or if the
suggested solutions do not resolve the problem, contact Cutera Service (
refer to Appendix C
).