Cutech 40700H-CT, Руководство пользователя

Страница: 23 / 31

23
MAINTENANCE (Cont)
4. Place a light coat of multi-purpose grease on the teeth of the gears (A) and a light coat of
spray lubricant on the chain (B). Do not over-lubricate and replace the side panel. SEE
FIG 11.
FIG 11
5. Replace all covers, panels and guards, that you removed once lubrication is complete.
BRUSH REPLACEMENT
Brush life will vary depending on the load placed on the motor. The brushes should be inspected
every 10-15 hours of use. To inspect or replace:
1.
Remove the brush holders, one of which is shown at (A). The other is located in the same
position on the rear of the motor assembly. The Brush Holder can be removed using a flat
blade screwdriver. SEE FIG. 12.
FIG 12
A
B
A