CUSTOM TRUCK LOAD KING 25-92, Руководство по установке

Страница: 80 / 171

Cancel Alarm Button
The
Cancel Alarm
button is used to silence the audible alarm. Press this button to cancel an audible
alarm from an:
•
Overload
•
ATB Alarm
•
Outrigger Horizontal Beam Mismatch
•
Operator Programmable Alarm.
The audible alarm remains cancelled until the condition which caused the alarm has been resolved.
Reset Function Kick-Out
When rigging the machine, it may be necessary to place the boom in a position which could cause a
function kick-out. In this situation, it would be necessary to use the
Cancel Alarm
button. The
Cancel
Alarm
button is also used to reset the function disconnect relay. Press and hold the button for 5
seconds to reset the relay. A second beep is heard confirming the bypass. Continue to hold the button
to maintain the function kick-out.
Should a different alarm condition occur while the relay is overridden, the new alarm will cause another
function kick-out. When the condition which caused the alarm is no longer present, the function
disconnect relay will reset to the normal condition.
WARNING!!
WHEN THE FUNCTION DISCONNECT RELAY IS RESET BY MEANS OF THE CANCEL
ALARM BUTTON, THERE IS NO LONGER PROTECTION AGAINST THE CONDITION
THAT CAUSED THE FUNCTION KICK-OUT.