background image

Maintenance & Troubleshooting Manual
HB-P527

SUPO-643

REV A

12

SECTION 3 | MAINTENANCE CHECKLISTS

3.1 | PRE-START INSPECTION CHECKLIST

THIS CHECKLIST MUST BE USED AT THE BEGINNING OF 
EACH SHIFT OR AFTER EVERY SIX TO EIGHT HOURS OF 
USE. FAILURE TO DO SO COULD AFFECT THE SAFETY OF 
THE OPERATOR.

CAUTION

Model Number:

 Serial Number:

Check each item listed below.

•  Use proper operating, service, and maintenance manual for specific information and settings
•  If an item is found to be unacceptable make the necessary repairs and check the “repaired” box.
•  When all items are “acceptable”, the unit is ready for service.
•  If an item is found to be unacceptable, make the necessary repairs and check the “repaired” box. 

When all items are “acceptable,” the unit is ready for service.

Y - Yes/Acceptable N - No/Unacceptable R - Repaired

Description

Y N

R

Visual Inspections

Check that there are no damaged, dented, or bent structural members.

□ □ □

There are no loose or missing parts.

□ □ □

Check that warning and instructional labels are legible and secure. Ensure that load capacity is 
clearly marked.

□ □ □

Check the platform rails and safety gate for damage.

□ □ □

Platform and base controls are not missing, damaged, or disconnected.

□ □ □

Electrical cables and wires are not torn, frayed, or disconnected.

□ □ □

Hydraulic hoses are not torn or loose, and there are no leaks. Check that hoses and cables 
have no worn areas or chafing.

□ □ □

Check the tires for damage. 

□ □ □

Check that all snap rings are secure in grooves on pivot pins.

□ □ □

Functional Tests

Gate closes automatically and latches (alignment can be adjusted with screw-on toe board or 
railing).

□ □ □

Platform Controls — Check all switches and push buttons for proper operation:
Emergency Stop (stops all movement)
Up/Down Controls (Elevates, Lowers, Enable button must be pressed)




Base Controls — Check all switches and push buttons for proper operation:
Emergency Stop (stops all movement)
Key Switch (Selects Platform Control, Ground Control, or Off)
Alarm (Not damaged, sounds for descent)
Up/Down Rocker Switch (Elevates, Lowers)

 

 

 

 

 

 

 


 




Wheels: Front and rear wheels rotate freely.

□ □ □

Brakes engage and hold when platform is elevated.

□ □ □

Date:

 Inspected By:

Courtesy of Crane.Market 

Содержание Hy-Brid Lifts HB-P527







































Отзывы: