Custom Equipment HY-BRID LIFTS HB-1030, Инструкция по эксплуатации и безопасности

Страница: 9 / 28

OPERATIONS & SAFETY
HB-1030/HB-1430 SUPO 610
REV M
9
Figure 4: Maintenance Lock Pin use
Figure 5: Maintenance Lock Pin storage
1.7 | SAFETY GUIDELINES
Only qualified operators may operate this unit.
• All operators must read and understand the Operation and Safety Manual. They must understand all decals and
warning labels on unit.
• Do not work on platform if your physical condition is such that you feel dizzy or unsteady in any way.
• Do not neglect/misuse machine. Report any misuse of equipment to proper personnel.
• Prevent unauthorized use; when unit is not in use, remove key.
• It is recommended all personnel on unit wear approved personal protective equipment (PPE), i.e. head gear.
Use machine only for purposes for which it was intended.
• Lift should never be used as a crane.
• Do not exceed the load capabilities of the platform.
• Distribute load evenly over platform floor area.
• Never use unit as electrical grounds for arc welding.
• Do not override any hydraulic, mechanical, or electrical safety devices.
Check job site for unsafe working conditions.
• Watch out for others. Keep others clear of operating platform. Never allow others to pass under a raised plat-
form or position the platform over someone.
• Avoid contact with fixed objects (walls, buildings, or other machinery, etc) or moving vehicles (automobiles,
cranes, etc).
• Follow any applicable national traffic regulations.
• Use indoors only. Lift is not designed for windy conditions or electrical storms.
• Unit must be on hard level surface before elevating. Do not operate on incline or uneven surface.
• You must maintain a clearance between any part of the machine, or its load, and any electrical line or appara-
tus. Follow local power line clearance regulations.
SECTION 1 | SAFETY