Custom Equipment HY-BRID LIFTS HB-1030, Инструкция по эксплуатации и безопасности

Страница: 16 / 28

OPERATIONS & SAFETY
HB-1030/HB-1430 SUPO 610
REV M
16
SECTION 3 | DECALS
No Authorized Use
Do not operate this machine unless you have been trained in safe operation.
Training includes complete knowledge of the safety and operating instructions
contained in the manufacturer’s manual, your employer’s work rules, and appli-
cable government regulations.
An untrained operator subjects himself and others to death or serious injury.
Read and understand all dangers and warning in the operator’s manual before
operating this machine.
Improper use of this machine could cause death or serious injury.
Inspect machine and make sure that it is operating properly, that all name plate
and hazard signs are in place and legible, and that the machine is in accordance
with the manufacturer’s maintenance requirements contained in the operating
and maintenance requirements contained in the operation and maintenance
manual and the daily safety checklist.
Lanyard anchorage point location.
Lanyard anchorage points are for work positioning restraints only.
Use of fall arrest systems attached to anchorage points on mobile equipment
may cause machine to tip, resulting in serious injury or death.
Crushing Hazard
Do not enter the space beneath the work platform or scissor structure unless
the maintenance lock is in place.
Refer to Maintenance Manual
Only qualified service personnel may service the machine. Failure to comply
with listed safety precautions may result in machine damage, personnel injury, or
death.
Replace designated items with manufacturer’s specified equipment only. Failure
to use these items may cause instability of platform.
Batteries produce explosive gas. Only charge batteries in a well-ventilated area.
Do not expose sparks or flames.
Do not smoke while charging battery.