Original instructions are written in English
Foreword
The purpose of this Maintenance Manual is to provide qualified service personnel with
information for servicing and maintaining Hy-Brid Lifts. All information in this manual must be
read and understood before any attempt is made to service this machine.
The operation and safety manual is considered a part of the work platform and contains
instructions and operating procedures essential to properly and safely operate the Custom
Equipment Hy-Brid Lift. Users must read and understand all information in the Safety and
Operations Manual before operation.
DANGER
THE OPERATION AND SAFETY MANUAL
MUST BE READ AND UNDERSTOOD
PRIOR TO OPERATING THE MACHINE.
THE USER/OPERATOR SHOULD NOT ACCEPT OPERATING RESPONSIBILITY UNTIL THE
MANUAL HAS BEEN READ AND UNDERSTOOD AS WELL AS HAVING OPERATED THE
LIFT UNDER SUPERVISION OF AN EXPERIENCED AND QUALIFIED OPERATOR.
BECAUSE THE MANUFACTURER HAS NO DIRECT CONTROL OVER MACHINE
APPLICATION AND OPERATION, PROPER SAFETY PRACTICES ARE THE
RESPONSIBILITY OF THE USER AND ALL OPERATING PERSONNEL.
WARNING
ANY MODIFICATION ON THIS MACHINE WITHOUT THE
EXPRESS WRITTEN CONSENT OF THE
MANUFACTURER IS PROHIBITED.
If there is a question on application and/or operation, contact:
Custom Equipment, Inc.
2647 Hwy 175
Richfield, WI 53076
USA
Phone: 262-644-1300
Fax: 262-644-1320
www.hybridlifts.com
For additional reference and troubleshooting information, please see
www.hybridlifts.com
.
Part# SUPO-633E
REV C
Page 4 of 34
Safety
Safety Symbols
DANGER
FAILURE TO FOLLOW THIS WARNING
WILL CAUSE DEATH OR PERSONAL INJURY.
"DANGER" indicates an imminently hazardous
situation, which, if not avoided,
will
result in
death or serious injury.
WARNING
FAILURE TO FOLLOW THIS WARNING MAY
CAUSE DEATH OR PERSONAL INJURY
.
"
WARNING" indicates a potentially hazardous
situation, which, if not avoided,
could
result in
death or serious injury
CAUTION
FAILURE TO FOLLOW THIS WARNING
MAY CAUSE INJURY OR DAMAGE EQUIPMENT
"CAUTION" indicates a potentially hazardous
situation which, if not avoided,
could
result in
minor or moderate injury or damage to
equipment
General Rules and Precautions
Custom Equipment, Inc. designed the Hy-Brid Lift push-around scissor lift to be safe and reliable. It is
intended for elevating personnel, along with their necessary tools and materials to overhead work
locations.
Vibration does not create significant hazards on this machine.
An operator of any type of work platform is subject to certain hazards that cannot be protected by
mechanical means. It is therefore essential that operators be competent, careful, physically and
mentally fit and thoroughly trained in safe operation of this machine.
Although Custom Equipment, Inc. conforms to specified EN: 280 requirements, it is the responsibility
of the owner to instruct operators with the safety requirements made not only by Custom Equipment,
Inc., but by the various safety boards in your area, as well as additional requirements set forth by EN:
280 If you come across a situation that you think might be unsafe, stop the platform and request
further information from qualified sources before proceeding.
WARNING
MAINTENANCE INFORMATION IS FOR USE BY TRAINED PERSONNEL ONLY
WARNING
NEVER REACH BETWEEN SCISSORS LINKS OR PROP UP PLATFORM UNLESS
MAINTENANCE PINS ARE IN PLACE.
Part# SUPO-633E
REV C
Page 5 of 34
