6
WARNING!
DO NOT OPERATE ANY ELECTRICAL COMPONENT
IN THIS SYSTEM WITHOUT USING A
GROUND FAULT CIRCUIT INTERRUPTER (GFCI)
3.
It is recommended that the pump is operated at a depth of 3 to 5 feet below
Mean Low Water (MLW) or 2 feet from the bottom to prevent pump clogging.
WARNING!
DO NOT OPERATE PUMP IN THE VICINITY
OF WORK LOCATION IF PUMPING CONCRETE OR
OTHER HAZARDOUS MATERIALS ARE PRESENT IN
THE WATER. SUCH MATERIALS CAN DAMAGE THE
PUMP AND HEATER SYSTEM AND CAUSE SEVERE
BURNS AND SKIN IRRITATIONS TO THE DIVER.
WARNING!
ALWAYS DISCONNECT THE PUMP FROM THE
POWER SUPPLY BEFORE SET UP OR REMOVAL
FROM THE WATER.
Set-Up Procedures
1.
Set up the unit in the are to be used.
2.
Pump must be plugged into the outlet provided on the unit, for the unit to
function correctly.
3.
Make all of the necessary connections.
a.
Water from the submersible pump or other external source.
