Custom Crimp D165NP Series, Руководство оператора

Страница: 6 / 11

6 Page
CRIMPING INSTRUCTIONS
Lubrication of the cone
must be done prior using
for the
fi rst time.
.
Lubricate die fi ngers, all
contact surfaces and die
cones.
Use care to be certain
that the die halves do not
overlap. Place the die set and hose
and
fi tting loosely in the
cone insert.
Place the Pusher Plate on
top of the die set.
Correct alignment of the
hose and
fi tting in the die
set is shown. Reference
crimp speci
fi cations for fi t-
ting locations.
Slide the Pusher onto the stud
on the hydraulic ram and press
and hold the start switch until
the motor shuts off. Check the fi nished crimp
diameter to be certain that it is
within the crimp speci
fi cation
limits.
Adjust Micrometer
per hose and
fi tting
speci fi cation.