D160S-T420 Portable
Service Hose Crimper
4
Bulletin:
The CustomCrimp
®
D100-T420 / D160-T420 Stand Alone Series
Crimpers with Micro-Crimp Sight Indicator Button have been upgraded with LED
Indicator Light.
Lubrication, Calibration and Repair procedures continue to be similar for all
D100-T420 / D160-T420 stand alone series crimpers.
STYLE: MICRO-CRIMP SIGHT INDICATOR BUTTON
STYLE: LED INDICATOR LIGHT
CRIMPING PROCEDURE:
• Make sure the cone base is lubricated.
• Place the lubricated die set in the cone base.
• Align the fitting in the die set.
• Place the lubricated pressure plate over the die set.
• Slide the pusher onto the pusher retaining ring on the hydraulic
cylinder.
• Set the Micro-Crimp Adjuster to the setting desired.
• Apply pressure to the (Hand or Pneumatic Pump)
until the
Micro-Crimp sight indicator button is just visible.
• Release pressure so the pusher will retract.
• Check the final crimp diameter with calipers to confirm that it is
within manufacturer’s specifications.
CRIMPING PROCEDURE:
• Make sure the cone base is lubricated.
• Place the lubricated die set in the cone base.
• Align the fitting in the die set.
• Place the lubricated pressure plate over the die set.
• Slide the pusher onto the pusher retaining ring on the hydraulic
cylinder.
• Set the Micro-Crimp Adjuster to the setting desired.
• Apply pressure to the (Hand or Pneumatic Pump)
until the
LED Indicator Light turns on.
• Release pressure so the pusher will retract.
• Check the final crimp diameter with calipers to confirm that it is
within manufacturer’s specifications.
FEATURES:
• Visual RED LED Indicator Light turned on, to indicate the crimp
is complete.
• No other adjustment than the Micrometer.
• Takes guesswork out of the crimping process.
D160S-T420 SERIES CRIMPER WITH
MICRO-CRIMP SIGHT INDICATOR BUTTON
UPGRADED WITH
LED INDICATOR LIGHT
