Custom Audio Electronics VKP80II-EE, Руководство пользователя

Страница: 33 / 84

5.4 Printer parameters
This printer allows the con fi guration of the parameters listed in the following table.
The parameters marked with the symbol
D
are the default values.
Settings remain active even after the printer has been turned off and they are stored in non-volatile memory.
ATTENTION:
Any changes to network parameters will interrupt browser connection. If the server not responding you
must reconnect to the new IP address set.
IP ADDRESS
IP address of printer; this parameter is assigned by the network administrator.
NOTE: Press the FORM FEED key to modify the value of the highlighted digit.
Pressing LINE FEED key to move the cursor on the next digit (if the cursor is on the latest digit, proceed
to next parameter by pressing the LINE FEED key).
SUBNET MASK
This parameter identifi es the local network address.
NOTE: Press the FORM FEED key to modify the value of the highlighted digit.
Pressing LINE FEED key to move the cursor on the next digit (if the cursor is on the latest digit, proceed
to next parameter by pressing the LINE FEED key).
DEFAULT GATEWAY
This parameter identifi es the Gateway IP address used to send applications to the ex-
ternal network.
NOTE: Press the FORM FEED key to modify the value of the highlighted digit.
Pressing LINE FEED key to move the cursor on the next digit (if the cursor is on the latest digit, proceed
to next parameter by pressing the LINE FEED key).
MAC ADDRESS
This is the number, provided by the constructor, that identifi es the printer; this number is
univocal.
NOTE: This parameter can’t be modi fi ed by set up.
RS232 BAUD RATE
Communication speed of the serial interface:
230400 38400 4800
115200 19200
D 2400
57600 9600 1200
RS232 DATA LENGTH
Number of bit used for characters encoding:
7 bits/car
8 bits/car
D
RS232 PARITY
Bit for the parity control of the serial interface:
None D = parity bit omitted
Even = even value for parity bit
Odd = odd value for parity bit
RS232 HANDSHAKING
Handshaking:
XON/XOFF = software handshaking
Hardware
D = hardware handshaking (CTS/RTS)
5. CONFIGURATION
User Manual
VKP80II-EE 33