Custom Audio Electronics KUBE 120, Руководство пользователя

Страница: 38 / 92

TOTAL CUT
Sets the behavior of the cutter when the total cut command 0x1B 0x69 ( i) is sent:
Disabled = The total cut command 0x1B 0x69 ( i) will be ignored and the device executes
a partial cut
Enabled D = The total cut command 0x1B 0x69 ( i) will be executed.
PAPEREND BUFFER
CLEAR
Cleaning mode of the data in receive buffer, if the printing is stopped due to lack of paper:
Disabled = The data remain in the receive buffer. When the paper runs out, the device
keeps the remaining data in the receive buffer and prints the remaining
portion of the ticket after that the new paper is loaded.
Enabled D = When the paper runs out, all data in the receive buffer are deleted.
POWERFAIL
WAKEUP MODE
This parameter set the printer state (ON or OFF) that will be automatically restored after
a power fail:
LAST PWR State
D = the printer returns in the previous state (ON or OFF) before the
power fail.
Always ON = the printer always switches on automatically, after a power fail.
Always OFF = D the printer switches on only by pressing the ON/OFF key after a
power fail.
PRINT DENSITY
Adjusting the printing density:
-50% -12% +25%
-37% 0
D +37%
-25% +12% +50%
38