Custom Audio Electronics KPM180H, Руководство пользователя

Страница: 80 / 152

TICKET MANAGEMENT This parameter allows the ticket management:
Disabled D = no check
Short Ticket = it is possible to manage tickets with length less than the distance between
black mark sensor and printing line
Check First = before printing, the device checks the integrity of the irst ticket
PRINTHEAD TEST
POWERON Setting of the performing of the print head test:
Disabled D = the test is performed only during the printing of the setup report
Enabled = the test is performed at each power on
CUT RECOVERY Setting of the paper recovery after the ticket cut:
After cut
D
= the paper recovery is performed immediately after the ticket cut
Before printing = the paper recovery is performed just before printing the next ticket
This parameter is valid only for KPM180H PRES, KPM180H PRES UHF, KPM180H LL,
KPM180H LL UHF, TK180 MET PRES, TK180 MET PRES UHF.
CASING TYPE Type of device casing:
Plastic
D
= plastic casing
Metal = metallic casing
The parameter is printed on setup report and has efect on device coniguration only
for TK180 MET, TK180 MET PRES, TK180 MET PRES UHF, TK180 MET UHF,
TK180 PLAS, TK180 PLAS UHF.
PRINT DENSITY Adjusting the printing density:
-50% -12% +25%
-37% 0
D
+37%
-25% +12% +50%
The print quality is strongly inluenced by the type of chemical treatment and the type of
storage to which the thermal paper has been subjected, as well as by the weight of the
same. It may therefore necessary to act on this parameter to obtain the desired print quality.
80